Bosch 18V Brushless Top-Handle Jig Saw (GST18V-37N) review

The Bosch GST18V-37N is an 18V brushless top-handle jig saw listed by Bosch as a bare tool. Its exact US page gives it a simpler evidence profile than some neighboring Bosch saws: the listing identifies a variable-speed dial, four-stage orbital action, tool-free T-shank blade change, LED light and blower, while the downloadable document linked there is a one-page battery/charger list rather than the saw's operating manual. This review treats the product page as evidence for its listed features, but does not turn missing operating instructions into assumptions about settings, vacuum adapters or tested cut quality.

A less fully documented alternative to the 50-series listing

Bosch lists a 0–3,300 no-load speed range, a 3/4-inch stroke, and a maximum wood capacity of 3-3/4 inches for the 37N. It lists 5/16 inch in steel, too. The product highlights round the wood figure to 3.7 inches and describe the saw as intended for curves and dense-wood work. These are manufacturer specifications and marketing descriptions, not measured results. Bosch's page does not sort the wood capacity into softwood versus hardwood, so this assessment does not promise that a particular board thickness, blade or curve will suit it.

The distinction from the GST18V-50N is not simply a model-number ladder. The 50N page lists up to 3,500 SPM and its manual describes a 1-1/32-inch stroke and a variable-speed trigger as well as a dial. The 37N page lists 3,300 SPM, a 3/4-inch stroke and a dial; it does not document that extra trigger control. The 37N is therefore a distinct configuration, not the same saw under a different package suffix. Compare the exact controls, stroke and published limits rather than reading the numbers as a tested ranking.

What you get—and what the sources do not settle

The exact Bosch page says battery and charger are not included, no case is included, and its “Includes” list names the saw alone. Bosch’s 2026 product catalog separately lists a T-shank blade, anti-splinter insert and plastic overshoe for the GST18V-37N. Those two manufacturer package descriptions disagree about these loose accessories, so treat their inclusion in an individual seller carton as unresolved and ask what the exact package contains. Both sources identify the saw’s T-shank blade type; that does not prove a blade is in the box. The product page lists a maximum 45-degree left/right bevel angle. Its built-in blower can keep chips off the cut line, but it is not extraction: the exact product page and its linked one-page battery document do not provide an external-vacuum connection or a compatible hood/nozzle route. This review therefore does not match the 37N to a vacuum requirement.

Battery evidence is clearer. The 2022 Bosch battery/charger sheet linked from the 37N page includes the exact GST18V-37N model and specifies Bosch or AMPShare 18V packs and chargers from its list. It also says to consult Bosch for up-to-date compatibility. Use the current exact-model list for the pack in hand; a system badge is not evidence that every battery sold under an AMPShare partner brand is supported.

Why the manual gap should change how you shop

The published four-stage orbital control says the machine has selectable orbital action, but the available exact-page sources do not explain the positions' material guidance or how to configure a metal cut. Although Bosch publishes a steel capacity, this assessment does not translate that number into a recommended soft-metal operating plan or claim that an orbital setting is appropriate for it. Likewise, the product page's 45-degree bevel figure documents capability but not the adjustment procedure or accessory interactions. Before a project depends on those details, locate the full instructions for the exact 3601EB7010 tool and confirm the exact setup rather than borrowing settings from the GST18V-50N manual.

Who should shortlist this Bosch

The 37N is a plausible fit for a buyer who wants a cordless top-handle form, Bosch/AMPShare 18V power, a dial, selectable orbital action and a built-in line blower—and who is comfortable checking the operating guide before making material-specific decisions. It is less suitable when a case, included battery/charger, external dust extraction, a confirmed U-shank option or a detailed metal-cut plan is essential. Bosch lists weight at 3.5 pounds and gives an 8-inch height and 8.1-inch length; treat those as catalog dimensions, not an in-hand comfort finding. Verify the GST18V-37N suffix, exact pack/charger compatibility, whether a T-shank blade, insert and overshoe are in the seller’s carton, and the full tool instructions before purchase. The primary references are Bosch's GST18V-37N product page, the 2026 Bosch Product Catalog, printed pages 232–237 and the linked battery/charger list.