Model assessment · Festool

Festool TRION PS 300 EQ Corded Barrel-Grip Jigsaw (576039) review

The 2021 and 2024 U.S. catalogs list the corded 576039; inspected 2026 catalog pages 120–127 show current cordless CARVEX models/accessories and do not list it. Earlier-reference is a source-snapshot classification, not proof of discontinuation or seller unavailability. Barrel grip with a latching slide switch; the manual distinguishes it from PSB 300 EQ’s pushbutton and lock button.

Sources checked 2026-10-31 · Our editorial approach

Earlier model: use this assessment to identify an existing product or check a specific offer. Match the exact suffix, instructions and seller terms.

Review the exact model, limitations and buying checks on BuyerShortlists before choosing a seller. We may earn from qualifying purchases.

Festool TRION PS 300 EQ corded barrel-grip jigsaw body with shoe and blade.
Retailer image · TRION PS 300 EQ 576039 Retailer product photograph, Tegs Tools; official 2022 Festool dealer guide links predecessor item 561443 to 576039.
A useful fit for

An earlier-reference corded barrel-grip TRION assessment for users who prefer the PS switch layout and need its documented 720 W / four-position material guidance.

The main tradeoff

Voltage must be read from the exact rating plate; the manual does not publish it. Its dust blow-off depends on an extractor, and the checked sources do not establish a combined vacuum-and-bevel setup or U-shank compatibility.

Your needs, this model

Does it fit your priorities?

Does the PS 300 EQ match a corded barrel grip T-shank softwood-orbital requirement?

Yes for the documented setup. The official TRION manual names wood and recommends pendulum positions 1–3 for both soft and hard wood; its 1,000–2,900 SPM range and 720 W figure come from Festool's U.S. catalog. The PS 300 EQ is the barrel grip version, and the catalog package lists two T-shank wood blades. No cut finish or thickness result is implied.

Explore this need in the finder →
Can the PS 300 EQ use ceramic with straight cutting?

The manual names ceramic tile and specifies pendulum setting 0. It gives no ceramic capacity; its separate 120 mm wood, 20 mm non-ferrous-metal and 10 mm steel maxima should not be transferred to tile. Use a purpose-suitable blade and follow the exact tile/blade guidance.

Explore this need in the finder →
Can the PS 300 EQ keep beveling with an external vacuum connected?

The manual separately describes up to 45-degree base adjustment and a 27 mm extraction route, but the checked source does not clearly establish the combined arrangement. The finder conservatively requires one documented operating plan; this is an evidence boundary, not proof the combination is physically impossible. Confirm the exact instructions and adapters before relying on both.

Explore this need in the finder →

A source-based assessment of the earlier-reference Festool TRION PS 300 EQ (catalog item 576039), a corded barrel-grip jigsaw. Its 720 W specification and broad material guidance are shared with the D-handle PSB 300 EQ, but the PS uses a latching slide switch rather than the PSB's pushbutton-and-lock arrangement.

TRION barrel grip, with a control difference that matters

The PS 300 EQ is the lower, barrel-grip member of the corded TRION pair. Festool's U.S. manual distinguishes its slide switch from the PSB 300 EQ's pushbutton: the PS switch can be latched for continued running. That makes the body format and the way the saw is switched separate selection questions; the related PSB is not just a package suffix. This is a paper-and-source assessment, not an in-hand steering or comfort test.

The older U.S. catalog identifies item 576039 and lists a 720 W motor, 1,000–2,900 strokes per minute, a 26 mm stroke and four pendulum positions, numbered 0 through 3. These figures describe the tool, not the pace or finish of a cut. Position 0 is straight reciprocation; 1–3 add orbital movement. The manual's material chart pairs soft and hard wood with positions 1–3, plywood with 1–2, plastic with 1–2, non-ferrous metal with 0–2, steel with 0–1 and ceramic tile with 0. Follow the exact blade and stock instructions rather than treating an orbital number as a quality grade.

Use the capacity table only for its named materials

Festool lists a maximum cut of 120 mm in wood, 20 mm in aluminum and 10 mm in steel. Those maxima are material- and blade-dependent; they do not certify ceramic depth, cast iron or a clean edge through a particular workpiece. The manual also gives speed-selector guidance by material: wood at the upper end, plastic across a broad middle-to-high range, ceramic and aluminum around the middle-to-high range, and steel lower. Start from the model's chart and the blade maker's recommendations; the evidence here is not a controlled comparison.

The supplied catalog package is more specific than a tool-body label: item 576039 is listed with two T-shank wood blades, chip catcher, splinterguard, Plug-It power cord, dust port and SYS3 M 187 Systainer. Check the actual seller's written contents and condition. The included T-shank blades establish that the package contains that interface, but the inspected U.S. manual/catalog evidence does not establish that U-shank blades are either accepted or forbidden. Verify any replacement blade against the exact clamp instructions.

Dust, bevel and power details are not one interchangeable setup

The manual describes a 27 mm external-extraction adapter and a directed blow-off function that operates in conjunction with a dust extractor. That conditional feature is not represented here as the standalone cutline-blower option: it does not make the machine an independent dust-capture system. Use a suitable extractor and confirm the adapter and hose arrangement before relying on it. The base can be adjusted for bevel work up to 45 degrees, but the checked manual does not clearly establish a combined vacuum-and-bevel arrangement. Treat those as separately documented setups unless the exact instructions for the offered configuration confirm otherwise.

The manual says to check the saw's rating plate for electrical supply information; it does not state an exact voltage in the reviewed manual text. I therefore leave voltage unasserted rather than infer it from the U.S. sales context. Match the nameplate to the outlet and use the manual's cord and grounding precautions.

Earlier catalog reference, not an availability promise

The 2021 and 2024 U.S. Festool catalogs identify the TRION item; the checked 2026 catalog pages cover the current cordless CARVEX listings and accessories rather than this corded model. That supports treating the PS 300 EQ as an earlier-reference assessment, but it does not prove that no seller has stock or that the model was formally discontinued. Do not use a catalog date as a seller-availability claim. A retailer photo can help identify the barrel-grip body, while catalog text—not the picture—supports the listed package.

For shopping, confirm the exact 576039 label, the supplied cord/blades/case and any extraction parts, plus return terms and a legible nameplate. The useful distinction from PSB 300 EQ is principally the grip and switch arrangement; shared headline capacity figures do not erase that difference. No current price, stock, ratings or customer experience is claimed.

Key specifications

Key details at a glance

Power sourceCorded mains power
Blade interfaceT shank
Cut-action settings0 / 1 / 2 / 3
Maximum documented speed2900 SPM
Maximum documented bevel45°
Battery includedNo
Charger includedNo
Blade listed in packageYes
Optional vacuum-extraction route documentedYes
Stroke length1.02 in
Maximum listed cutting capacity4.72 in
Hard case listed in packageYes

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this review

Sources for this assessment

Make the next check about your project

Use the finder to combine material, blade interface, grip and operating setup. It matches documented capabilities, not guaranteed results.

In this review

Questions to consider for this model

Read the matching requirement, its tradeoffs and the other reviewed options.

More matching requirements
Combine my requirements →