Model library
Each review is tied to a retail model and market. Package differences and operating limits belong in the assessment; a finish, battery bundle, or adjacent model does not silently inherit its sibling's facts.
Coverage reflects a finite, dated set of manufacturer, support, and relevant regional or historical sources. U.S.-market candidates are distinguished from clearly labelled reference-only models; this library is not a complete census of every jigsaw available in the United States.
Official product image · GST18V-37NBosch
An 18V brushless top-handle bare tool with dial speed control, four-stage orbital action, a built-in blower and a Bosch/AMPShare pack list.
Read the assessment ↗
Official product image · GST18V-47N bare toolBosch
A Bosch 18V barrel-grip bare-tool jigsaw with a six-mark speed dial, locking slide switch, T-shank clamp, four orbital positions, chip blower and LED.
Read the assessment ↗
Official product image · GST18V-50BNBosch
A Bosch 18V brushless barrel-grip bare tool with dial-set speed, four orbital positions, T-shank blades, a 45-degree shoe and listed extraction hood/outlet.
Read the assessment ↗
Official product image · GST18V-50NBosch
An 18V brushless top-handle bare tool with both trigger and dial speed control, four orbital settings and a Bosch-listed T-shank configuration.
Read the assessment ↗
Official product image · GST18V-60BCNBosch
A Bosch 18V bare-tool jigsaw with barrel grip, two-sided pulse on/off switch, speed presets, adaptive entry control, T-shank clamp and included hood/nozzle.
Read the assessment ↗
Official product image · GST18V-60CNBosch
A Bosch 18V bare-tool jigsaw with a top handle, trigger-speed control, T-shank clamp, four pendulum stages and a connected-settings interface.
Read the assessment ↗
Official product image · JS120 tool onlyBosch
A Bosch 12V Max cordless bare tool with a barrel grip, three orbital positions, T-shank-only blade clamp and no documented built-in blower or vacuum-extraction setup.
Read the assessment ↗
Official product image · Bosch JS260Bosch
A corded 120V Bosch top-handle jigsaw with a 6.0A motor, 3/4-inch stroke, variable-speed trigger and separate speed dial, T-shank-only clamp, four action positions, always-on cutline blower and heavy-gauge steel shoe. Bosch lists an anti-splinter insert, blade, wrench and carrying bag; no Bosch-supported vacuum route or JA1010 guide compatibility is listed.
Read the assessment ↗
Official product image · Bosch JS365Bosch
A corded 120V Bosch top-handle jigsaw with a 6.5A motor, one-inch stroke, variable-speed trigger and separate dial, T-shank-only clamp, four action positions, switchable cutline blower and die-cast aluminum shoe with steel insert. Bosch lists a blade, anti-splinter insert, non-marring overshoe, bevel wrench and hard case; the compatible JA1009 extraction kit and JA1010 guide are separate.
Read the assessment ↗
Official product image · JS470E top handleBosch
A corded 120V Bosch jigsaw with a top handle, variable-speed trigger, separate maximum-speed dial, lock-on button, T-shank-only clamp, four orbital settings, cutline blower and a beveling footplate. Its listed package includes a case, overshoe, anti-splinter insert, blade and bevel wrench; the vacuum-extraction attachment is separate.
Read the assessment ↗
Official product image · JS470EB barrel gripBosch
The corded 120V barrel-grip member of Bosch's JS470 family uses a variable-speed dial and slide on/off switch rather than the JS470E's top-handle trigger and lock-on arrangement. Bosch lists a T-shank-only clamp, four orbital settings, a cutline blower and a beveling footplate; the listed package includes a case, overshoe, anti-splinter insert, blade and wrench.
Read the assessment ↗
Official product image · JS572EBK saw and caseBosch
A corded 120V barrel-grip jigsaw kit with a T-shank-only clamp, four orbital positions, switchable chip blower, 45-degree shoe and a documented optional JA1012 vacuum route.
Read the assessment ↗
Official product image · JS572EK saw and caseBosch
A corded 120V top-handle jigsaw kit with a T-shank-only clamp, trigger speed control, four orbital positions, switchable chip blower, 45-degree shoe and a documented optional JA1012 vacuum route.
Read the assessment ↗
Official product image · JSH180B bare toolBosch
A Bosch 18V top-handle cordless jigsaw with variable-speed trigger, T-shank blade clamp, four orbital settings and manufacturer-documented 45-degree bevel shoe.
Read the assessment ↗
Official CMCS600B tool-only imageCRAFTSMAN
A V20 cordless, brushed top-handle jigsaw body with T- and U-shank support, two orbital positions plus straight cutting, a blower and a wrench-adjusted bevel shoe. The -B listing is tool-only; the related CMCS600D1 package supplies a 2.0Ah battery and charger with the same CMCS600 saw body.
Read the assessment ↗
Official CMCS650B tool-only imageCRAFTSMAN
A current CRAFTSMAN V20 brushless RP top-handle bare tool with a 0–3,200 no-load SPM trigger, three orbital positions plus straight action, tool-free blade release, T/U-shank support, LED, blower and a keyless bevel shoe.
Read the assessment ↗
Official CMES610 5A corded sawCRAFTSMAN
A corded top-handle jigsaw with a 0–3,000 SPM variable-speed trigger, four cut-action positions, explicit T- and U-shank compatibility, and a wrench-adjusted shoe that bevels left or right up to 45°. The exact package page lists one saw and a wood blade; the blade's shank is unspecified.
Read the assessment ↗
Official CMES612 6A corded sawCRAFTSMAN
A corded top-handle jigsaw with a 0–3,200 SPM trigger and separate seven-position maximum-speed dial, four cut-action positions, and a shoe that bevels left or right up to 45°. The exact package list includes one wood blade and an Allen key; the checked primary sources do not specify the blade-shank family.
Read the assessment ↗
Official product image · DCS331B tool onlyDEWALT
A 20V MAX cordless, top-handle jigsaw with a variable-speed trigger up to 3,000 SPM, T-shank lever-action clamp, four cut-action settings, adjustable blower and 45-degree bevel capability. DEWALT lists the bare-tool saw with two blades; battery and charger are separate.
Read the assessment ↗
Official product image · DCS334B tool onlyDEWALT
A cordless, top-handle 20V MAX XR brushless jigsaw with T-shank blade clamp, four selectable cut actions, variable-speed trigger and dial, LED worklights, and an integrated cutline blower. This US bare-tool package includes a blade but not a battery or charger.
Read the assessment ↗
Official product image · DCS335B tool onlyDEWALT
A cordless, brushless DEWALT 20V MAX XR barrel-grip jigsaw with a T-shank clamp, preset speed dial and on/off switch, four straight/orbital positions, integrated blower, optional vacuum route and a 45-degree bevel shoe. The tool-only package lists one blade; battery and charger are separate. DEWALT's manual reserves orbital action for suitable soft materials and prohibits it on hardwood or metal.
Read the assessment ↗
Official product image · DW317K packageDEWALT
A corded, brushed DEWALT jigsaw package with a speed dial, variable trigger, keyless lever-action clamp, and four straight/orbital action settings. The US product page lists a contractor bag with the saw; blade-shank compatibility and dust collection are not established by the checked sources.
Read the assessment ↗
Official product image · DW331K saw and boxDEWALT
A corded, 120 V AC top-handle jig saw kit with a speed dial and trigger, T-shank-only clamp, four cut-action positions, integrated chip blower, bevel shoe and kit box. The exact U.S. product page has a contradictory 230V field; verify the physical tool nameplate and exact offer.
Read the assessment ↗
PSBC 420 EB-Basic D-handle cordless jigsaw with blades and Systainer shown.Festool
Festool's current U.S.-listed 18V-class CARVEX cordless D-handle jigsaw. Its Basic set lists a blade, splinterguard and SYS3 M 187 Systainer but no battery or charger; the PSBC adds a variable-speed trigger and safety lock and has a lower 1,000 SPM minimum than the PSC barrel-grip model.
Read the assessment ↗
PSC 420 EB-Basic barrel-grip cordless jigsaw with blades and Systainer shown.Festool
Festool's current U.S.-listed 18V-class CARVEX cordless barrel-grip configuration. The Basic set lists a blade, splinterguard and SYS3 M 187 Systainer but no battery or charger; verify the exact box because the 2026 catalog and live product-page summary differ on blade count and chip catcher.
Read the assessment ↗
Official image · 4329K case-included packageMakita
A compact corded top-handle model with variable speed, three orbital settings plus straight action, a wrench-operated blade clamp, rear vacuum port and case-included package.
Read the assessment ↗
Official product image · 4350FCTMakita
A corded top-handle FCT model with electronic speed control, tool-less blade change, a built-in cutline blower and a case-and-blade package.
Read the assessment ↗
Official product image · 4351FCT barrel gripMakita
A corded barrel-grip FCT model with electronic speed control, tool-less blade change, a built-in cutline blower and the maker-listed multi-blade case package.
Read the assessment ↗
Official product image · GVJ01Z tool onlyMakita
A 40V max XGT brushless barrel-grip tool-only saw with a six-position 800–3,500 SPM dial and a documented material/action chart.
Read the assessment ↗
Official product image · GVJ02Z tool onlyMakita
A 40V max XGT brushless D-handle tool-only saw with a variable trigger, 0–3,500 SPM listing and manual-backed vacuum-plus-bevel setup guidance.
Read the assessment ↗
Official product image · JV0600K kitMakita
A corded top-handle kit with a variable-speed dial and trigger, three orbital settings plus straight action, a through-body vacuum port, and an included case, B-10 blade and hex wrench.
Read the assessment ↗
Official tool-only image · VJ05ZMakita
A 12V max CXT brushless barrel-grip jigsaw with a five-position speed dial, straight and orbital action, and a built-in cutline blower; the reviewed VJ05Z package is tool-only.
Read the assessment ↗
Official product image · XVJ01Z tool onlyMakita
An 18V LXT brushless barrel-grip tool-only saw with 800–3,500 SPM, a 1-inch stroke and a manual-backed material/action chart.
Read the assessment ↗
Official Makita XVJ02Z tool imageMakita
Current-reference 18V LXT brushless top-handle tool-only jigsaw with six speed-dial positions, 800–3,500 SPM, no-load speed reduction, three orbital settings plus straight action, built-in blower, dual LEDs and 0–45° bevel base. Battery and charger are not included.
Read the assessment ↗
Official product image · XVJ04Z tool onlyMakita
A compact 18V LXT brushless D-handle tool-only saw with a 7/8-inch stroke, 0–3,000 SPM control and three orbital settings.
Read the assessment ↗
XVJ05Z official action imageMakita
An 18V LXT brushless barrel-grip tool-only saw with an 800–3,000 SPM dial, manual-specific orbital guidance and separate blower/vacuum routes.
Read the assessment ↗
Official product image · Metabo HPT CJ18DAQ4 bodyMetabo HPT
A U.S.-listed tool-body-only 18V-class top-handle jigsaw with 0–2,500 SPM variable trigger, three orbital positions, a built-in cutline blower and an optional external dust-collection arrangement. Compatible battery, charger and dust adapter are separate; its manual says not to bevel with the dust collector installed.
Read the assessment ↗
Official product image · Metabo HPT CJ36DAQ4 bodyMetabo HPT
A tool-body-only 36V MultiVolt brushless top-handle jigsaw that accepts a compatible MultiVolt battery or the separately sold ET36A AC adapter. Its manual identifies a T-shank-only clamp, four orbital positions, a cutline blower and a vacuum-accessory/bevel restriction.
Read the assessment ↗
Official product image · Metabo HPT CJ90VST2Metabo HPT
A 5.5 A, 120 V corded D-handle jigsaw with a T-shank-only clamp, selectable orbital action, built-in blower and 45-degree bevel shoe. Its exact product page and linked manual disagree on stroke length and steel capacity.
Read the assessment ↗
Official Milwaukee image · 2737-20 tool onlyMilwaukee
Current-reference 18V M18 brushless D-handle tool-only jigsaw with a T-shank clamp, four orbital positions, trigger speed control, integrated blower and a shoe that tilts to 45 degrees. Battery and charger are not included.
Read the assessment ↗
Official Milwaukee image · 2737B-20 tool onlyMilwaukee
Current-reference 18V M18 brushless barrel-grip tool-only jigsaw with T-shank clamping, four orbital positions, a speed dial with auto-controlled start, switchable blower and 45-degree bevel detents. Its manual limits beveling and dust-collection attachment use to M18 batteries no larger than 5.0Ah.
Read the assessment ↗
Official product image · RIDGID R86344BRIDGID
Current-reference U.S. RIDGID 18V brushless top-handle jigsaw sold tool-only with a T-shank wood blade and dust-port attachment; the battery and charger are separate. The R86344 manual limits metal work to no-orbit mode and does not give a cut-depth rating.
Read the assessment ↗
Official product image · RIDGID R86345BRIDGID
Current-reference U.S. RIDGID 18V brushed top-handle jig saw sold tool-only with a T-shank wood blade and dust-port attachment; battery and charger are separate.
Read the assessment ↗
Official JS481LG corded saw imageRYOBI
A current US 120V corded top-handle jigsaw with a T-shank-only rapid blade clamp and four orbital positions; its manual charts starting settings for several wood classes, plastics, laminate, and thin sheet metal.
Read the assessment ↗
Official JS651L1 corded saw imageRYOBI
A current US corded top-handle saw with a T-shank-only rapid clamp, four material-specific orbital positions, and a documented rear vacuum port for a separate 1 1/4-inch hose.
Read the assessment ↗
Official PBLJS01B bare-tool imageRYOBI
A current 18V ONE+ brushless top-handle saw with T-shank-only blade clamping, a variable-speed lever, four action settings and a beveling shoe. The PBLJS01B tool-only package lists a wood blade and non-marring shoe but no battery or charger.
Read the assessment ↗
Official PCL525B bare-tool imageRYOBI
A current US tool-only 18V ONE+ top-handle jigsaw whose PCL525 manual documents four orbital positions, T-shank-only blade fit, and stock-specific guidance for wood, plastic, laminate, and thin sheet metal.
Read the assessment ↗
Official PSBJS01B bare-tool imageRYOBI
A current-reference 18V ONE+ brushless barrel-grip saw-body package with a T-shank-only clamp, four material-directed orbital settings, selectable blower or vacuum dust routes, and a left/right beveling shoe. The PSBJS01B listing says its battery and charger are sold separately.
Read the assessment ↗
Official SKIL image · JS313101SKIL
A 120V 5A top-handle jigsaw with 18 mm stroke, variable-speed trigger, four orbital settings, a blower switch, T/U shank clamp and a hex-key shoe adjustment.
Read the assessment ↗
Official SKIL image · JS314901SKIL
A 120V 6A corded top-handle saw with a 23 mm stroke, four orbital settings, tool-free T/U blade changes, a cutline blower and a tool-free bevel lever.
Read the assessment ↗
Official SKIL image · JS5833A-10 with packSKIL
A current 12V brushless compact top-handle kit with T- and U-shank support, four orbital positions and an included 2.0Ah PWR CORE 12 battery and charger; the shared JS5833A-00 manual describes the tool body.
Read the assessment ↗
Official SKIL image · JS820202 kit sawSKIL
A current 20V brushless top-handle kit with a 2.0Ah PWR CORE 20 battery, PWR JUMP charger and two named-purpose blades; operating details are from the linked JS820201 body manual.
Read the assessment ↗
Official SKIL image · JS820302 kit sawSKIL
A current 20V top-handle cordless kit with a 7/8-inch stroke, 2.0Ah PWR CORE 20 battery, charger, variable trigger with brake, four orbital positions and tool-free bevel adjustment.
Read the assessment ↗
Official SKIL image · JS8290B-10 with pack attachedSKIL
A current SKIL PWR CORE 20 kit with a JS8290B-00 jigsaw, one 2.0Ah battery, charger, and named wood and metal blades.
Read the assessment ↗
Official WEN 20661 kit imageWEN
A top-handle 20V Max jigsaw assessment with a 2.0Ah single-saw kit, four-position orbit selector, chip blower, dust port and beveling shoe. Standalone 20661BT is tool-only; WEN separately lists that saw component in the 20V3KITDSJ multi-tool bundle with a shared battery and charger.
Read the assessment ↗
Official WEN 20667 brushless kit imageWEN
A top-handle 20V Max brushless jigsaw kit with a manufacturer-listed 4.0Ah battery and charger, T-shank wood blade, metal-cutting blade, four-position orbit selector, chip blower, dust port and beveling footplate. The shared 20667BT body is sold tool-only; the kit page contains a conflicting battery-capacity sentence.
Read the assessment ↗
Official WEN 20670 kit imageWEN
A top-handle 20V Max brushless jigsaw kit with a 4.0Ah battery and charger, four-position orbit selector, T-shank wood blade, chip blower, dust port and beveling footplate. WEN's product page and model manual disagree on maximum speed; the review uses the manual's 3,100 SPM figure and notes the conflict.
Read the assessment ↗
Official product image · WEN 33606WEN
A 120V corded, top-handle T-shank jigsaw with a six-position speed dial, four orbital settings, switchable cutline blower or vacuum connection, and a beveling shoe. The manufacturer lists wood and metal blades in the package.
Read the assessment ↗Use these guides to check a model you already own or a specific seller listing. Compare the exact model, condition and included equipment.
Seller specimen · 1581AVS bodyBosch · Earlier model
An earlier Bosch corded top-handle jigsaw with a variable-speed trigger, four orbital positions, a three-position chip blower and a screw-secured blade procedure. Bosch documents T101B blade use with its anti-splinter insert; the exact retail package and electrical nameplate must be checked on the individual tool.
Read the assessment ↗
Used specimen · 1582 bodyBosch · Earlier model
An earlier Bosch 1582 body kept distinct from the 1582VS and 1582DVS. A Bosch family manual covers straight and orbital general-wood arrangements, and its T101B anti-splinter example can be bridged to Bosch's T-shank blade listing. Exact speed, electrical nameplate, capacity, dust route, bevel rating, U-shank acceptance and package contents are not established for this body.
Read the assessment ↗
Used auction specimen · 1582.DVS bodyBosch · Earlier model
An earlier Bosch 1582-family jigsaw whose manual identifies a separate rear speed-control switch and a dust-extraction connection through the footplate. The DVS body is distinct from 1582 and 1582VS; numeric speed, capacity, exact blade interface, nameplate and package contents are not established here.
Read the assessment ↗
Seller specimen · 1582VS bodyBosch · Earlier model
An earlier Bosch corded barrel-grip jigsaw with a separate rear speed control, four orbital positions, a three-position chip blower and a footplate listed for bevel cuts up to 45 degrees. Bosch's manual documents a T101B blade example and a CLIC release procedure; confirm the exact body label, electrical nameplate, blade fit and contents of any specific offer.
Read the assessment ↗
Seller specimen · 1584AVS bodyBosch · Earlier model
An earlier Bosch 1584AVS body with a barrel grip, slide switch, six-position preset speed dial, four orbital settings and a three-position chip blower. Bosch documents a separate optional dust-collection adapter for this suffix and a 45-degree bevel shoe; the exact retail package and any specimen's electrical nameplate still need checking.
Read the assessment ↗
Seller specimen · 1584DVS bodyBosch · Earlier model
An earlier Bosch 1584DVS body with a barrel grip, six-position preset speed dial, four orbital positions, a three-position chip blower and a dust port integrated into the footplate area. Bosch's manual requires optional hose/connector/adapter pieces for vacuum use and says collection efficiency falls when the shoe is angled.
Read the assessment ↗
Seller specimen · 1584VS bodyBosch · Earlier model
An earlier Bosch 1584VS body with a barrel grip, slide switch, six-position preset speed dial, four orbital positions and a three-position chip blower. Its shared Bosch manual documents a bevel shoe and a T101B blade example; unlike the 1584DVS, it does not document an integrated dust port or external-vacuum route for this suffix.
Read the assessment ↗
Seller specimen · 1587AVS bodyBosch · Earlier model
An earlier Bosch top-handle jigsaw with variable-speed trigger, preset speed dial, four orbital-selector positions, three-position blower and bevel shoe. Bosch documents a separate optional Dust Collection Adapter Kit for this AVS suffix and footplate inserts; a plain AVS offer does not establish that the adapter, plastic insert or case is included.
Read the assessment ↗
Specimen · Bosch 1587VS bodyBosch · Earlier model
An earlier Bosch top-handle jigsaw with variable-speed trigger, trigger preset dial, orbital selector, three-position cutline blower and bevel shoe. Bosch's shared 1587-family manual does not document a vacuum-extraction arrangement for the VS suffix; current specimen voltage, package and condition require direct checking.
Read the assessment ↗
Seller specimen · 1590EVS bodyBosch · Earlier model
An earlier corded Bosch top-handle jigsaw with a speed-controlled trigger, separate speed dial, lock-on button, documented T-shank plunger, orbital selector, blower and beveling footplate. Verify the exact K or SL suffix and package before considering an offer.
Read the assessment ↗
Seller specimen · 1591EVS bodyBosch · Earlier model
An earlier corded Bosch barrel-grip jigsaw with a locking side slide switch, separate speed dial, orbital selector, blower and beveling footplate. Its shared manual gives model-specific operating guidance, but the reviewed sources do not establish its blade-shank family.
Read the assessment ↗
Bosch 7561-118 · retailer imageBosch · Earlier model
An earlier Bosch pneumatic barrel-grip jigsaw documented in a U.S. catalog and shared air-tool manual. It depends on a compressor/air-line setup rather than mains electricity or a battery; Bosch's published airflow and tool-weight figures vary across documents, so verify the exact unit and instructions.
Read the assessment ↗
Specimen · Bosch JS5 bodyBosch · Earlier model
An earlier Bosch corded top-handle jigsaw with variable speed, four orbital positions, a two-position chip blower, bevel shoe and optional dust-port vacuum hose. Bosch-authored sources conflict on stroke length (7/8 in in the manual; 1 in in the catalog), so no matching stroke value is assigned. The exact blade-shank standard and any seller-specific package contents must be checked.
Read the assessment ↗
PS 300 EQ corded barrel-grip body shown; verify the 576039 package contents.Festool · Earlier model
The 2021 and 2024 U.S. catalogs list the corded 576039; inspected 2026 catalog pages 120–127 show current cordless CARVEX models/accessories and do not list it. Earlier-reference is a source-snapshot classification, not proof of discontinuation or seller unavailability. Barrel grip with a latching slide switch; the manual distinguishes it from PSB 300 EQ’s pushbutton and lock button.
Read the assessment ↗
PS 420 EBQ corded barrel-grip body shown; check the exact box inventory.Festool · Earlier model
The 2021/2022/2023 U.S. Festool materials identify this corded 420 configuration; inspected 2026 catalog pages 120–127 show current cordless PS/PSBC Carvex products and related accessories rather than this EBQ model. This does not prove formal discontinuation or lack of seller stock. Barrel grip with side on/off switches and a speed wheel; the manual describes a latch/continuous-switch option and an automatic A speed setting. It is distinct from PSB 420 EBQ’s variable-speed trigger.
Read the assessment ↗
PSB 300 EQ corded D-handle body shown; verify the exact 576049 package.Festool · Earlier model
The 2021 U.S. catalog lists the corded 576049 and the 2024 catalog lists its 576049 identifier. Inspected 2026 pages 120–127 do not list this corded model. Earlier-reference is not proof that no retailer has stock or a formal discontinuation notice. Top/D-handle with pushbutton switch and lock button for continuous operation, distinct from PS 300 EQ’s latching slide switch.
Read the assessment ↗
PSB 420 EBQ corded D-handle body shown; check the exact box inventory.Festool · Earlier model
The 2021–2023 U.S. Festool catalog/dealer material identifies this corded 420 configuration; inspected 2026 catalog pages 120–127 show current cordless Carvex models/accessories rather than this EBQ tool. This is not an official discontinuation or seller-unavailability finding. Top/D-handle with variable-speed trigger and separate safety lock. Trigger range is 1,000–3,800 SPM when used; the wheel sets the maximum. The lock is not a documented trigger lock-on for continuous running.
Read the assessment ↗
VJ04R1 CXT battery, charger and case kitMakita · Earlier model
A discontinued 12V max CXT top-handle kit assessed from Makita’s exact US page, VJ04 documentation and 2016 package flyer.
Read the assessment ↗
VJ06R1J CXT battery, charger and case kitMakita · Earlier model
A discontinued 12V max CXT brushless top-handle kit with a five-position speed dial, tool-less blade change and VJ06-specific cutting guidance.
Read the assessment ↗
Official kit image · XVJ03Makita · Earlier model
Earlier-model 18V LXT brushed top-handle kit reference with trigger-speed control, three orbital settings plus straight action, a 0–45° base and an optional vacuum-nozzle route. Its official US page marks the model discontinued; confirm the precise kit suffix, battery condition and contents.
Read the assessment ↗
Lowe’s listing image · CJ160VMetabo HPT · Earlier model
An earlier 120 V AC, 7.0 A corded D-handle jigsaw independently identified in Metabo HPT's U.S. tool card and its CJ160V/CJ160VA manual. The card gives an exact U.S. accessory list; the manual distinguishes the D-handle trigger/stopper from CJ160VA's barrel-grip switch. Standard speed is 800–2,800/min and the tool has four orbital positions. Its straight stainless-steel procedure needs the separate No. 97 blade. The manual prohibits angular cuts with the chip cover or dust collector fitted.
Read the assessment ↗
Exact-model listing image · CJ90VSTMetabo HPT · Earlier model
An earlier 5.5 A corded D-handle jigsaw documented in Metabo HPT's 2020 U.S. tool card. The card specifies 850–3,000 SPM, a 3/4-inch stroke, four-mode orbital action, a T-shank-only clamp and a built-in blower. Its model-family manual gives material and operating limits but says voltage varies by area; check the exact unit nameplate and seller package.
Read the assessment ↗
Retailer catalog image · RIDGID R8831RIDGID · Earlier model
An earlier RIDGID 18V top-handle jigsaw with a T-shank-only clamp, five orbital settings, and a 45-degree bevel shoe; the retrieved U.S. primary sources do not establish its retail package.
Read the assessment ↗
Retailer image · RIDGID R8832BRIDGID · Earlier model
Earlier RIDGID 18V brushless top-handle jigsaw body with four orbital positions, T- and U-shank blade support, and a switchable blower/vacuum route. The exact-model retailer image is verified, but the U.S. standalone package remains unknown; the manual bars the vacuum attachment while the shoe is bevelled.
Read the assessment ↗
Official product image · JS451LRYOBI · Earlier model
A discontinued US 120V corded top-handle jigsaw with a 600–2,600 SPM no-load range, four orbital positions, and a clamp designed for both T- and U-shank blades. Its manual describes wood, plastic, laminate, and no-orbit metal work, plus a supplied vacuum attachment.
Read the assessment ↗
Official product image · JS481LRYOBI · Earlier model
An earlier U.S. corded top-handle jigsaw whose shared JS481L/JS481LG manual gives four material-specific orbital settings and T-shank-only blade guidance; its own product page does not list package contents.
Read the assessment ↗
Official product image · P5231 saw bodyRYOBI · Earlier model
An earlier-reference 18V ONE+ top-handle orbital jigsaw with a published 1,100–3,000 SPM variable-speed range, 0–45° bevel adjustment, and a BladeSaver drop-base feature. The exact page lists a wood-cutting blade and Allen wrench; battery and charger are sold separately.
Read the assessment ↗
Official product image · P524 saw bodyRYOBI · Earlier model
An earlier-reference, cordless RYOBI 18V ONE+ brushless top-handle saw. Its P524 manual specifies a T-shank-only clamp, four material-specific orbital positions, an integrated sight-line blower, and a 0–45° bevel range.
Read the assessment ↗
Product listing image · SKIL 4295-01SKIL · Earlier model
An earlier support-indexed SKIL corded jigsaw with T- and U-shank compatibility, straight action, a chip blower and a 0.7-inch stroke; the exact carton contents are not documented in the captured manufacturer sources.
Read the assessment ↗
Official product image · WEN 3602WEN · Earlier model
An earlier 120V corded top-handle saw with T-shank-only compatibility, a four-position orbital selector, a 45-degree bevel shoe and a rear dust port. WEN marks the model discontinued; verify the exact package and condition.
Read the assessment ↗
WEN legacy product image · 3702WEN · Earlier model
A historical 120V, 3.5A corded top-handle jigsaw documented in WEN's legacy U.S. page and model manual. The exact blade shank, material capacities, package and current availability are not established.
Read the assessment ↗Use these references to distinguish model names and versions. For a buying shortlist, start with the finder.
1581Bosch · Model reference
A documentation-only reference for the distinct unsuffixed Bosch 1581 body identified as 0601581234. The checked evidence does not establish an exact operating plan, retail package, current offer or body photograph, so this model is excluded from the buying matcher.
Read the assessment ↗
Manual illustration · family, not specimenBosch · Model reference
An earlier Bosch top-handle jigsaw with a dust port integrated into the footplate area, variable-speed trigger, preset dial, four orbital-selector positions and bevel shoe. The manual requires separate hose and adapter pieces and says angled-shoe use requires removal of the DVS dust cover, reducing collection efficiency.
Read the assessment ↗
Official HiKOKI body reference · CJ160VAMetabo HPT · Model reference
A distinct barrel-grip configuration named in the U.S. 120 V CJ160V/CJ160VA manual. The manual's figure shows a body switch and speed dial rather than CJ160V's D-handle trigger/stopper; an official HiKOKI international page separately identifies the CJ160VA soft barrel-grip body and is used only for that form, not U.S. package facts. Its common manual lists 7.0 A, 800–2,800/min, four orbital positions and the same capacities as CJ160V. No exact U.S. standalone sales page or U.S. package is established here, so this reference is not a purchase-match candidate.
Read the assessment ↗
Manual illustration · CJ90VAST familyHiKOKI · Model reference
An international model reference supported by HiKOKI's shared CJ90VST/CJ90VAST manual and Italian CJ90VASTWA technical sheet. The sources distinguish the barrel-grip CJ90VAST from CJ90VST; they do not establish a U.S. retail version or package, so this record is not a U.S. buying match.
Read the assessment ↗
Official kit-page image · P1903NRYOBI · Model reference
A reference record for the discontinued U.S. P1903N kit SKU. RYOBI's exact page names a jigsaw, hand vacuum, area light and quarter-sheet sander, but does not identify the jigsaw body or give a complete written carton list. This is not an operating-plan or product-match review.
Read the assessment ↗
Official kit-page image · P1967NRYOBI · Model reference
A reference record for RYOBI's discontinued U.S. P1967N kit page, titled “ONE+ BR Jigsaw Kit.” The page does not name the jigsaw body or provide a written included-items list. Its image is a visual page association, not proof of the seller's complete carton.
Read the assessment ↗No model matches that search. Try a brand or a shorter model code.